Tana Shark 220D / 440D
Diesel Driven Models - Mobile Waste Shredders on Semi-Trailer*
General Information
|
Operating weight, kg *) Total length in transportation, mm Total length in operation, mm Total width, mm Total height in transportation, mm Rotor shaft type Conveyor belt speed (max. m/s) Conveyor width Conveyor length (m) Conveyor height on operation Integrated scale Remote control Overband magnet power rating (Gs/cm²) |
220D 24040 10530 15790 2520 3880 Single 3 1000 12.5 4030 X X 8000 |
440D 27100 10530 15790 2520 3880 Single 3 1000 12.5 4030 X X 8000 |
*Please note, Tana Shark 220D and 440D shredders sold by GCM Enviro must be fitted to a semi-trailer that meets Australian standards.
Overseas trailer model is pictured, please contact us for more information on 02 9457 9399.
Engine and power transmission
|
Engine
Power rating (SAE J1995) (kW) Displacement (l) No. of cylinders Emission limits Fuel tank (litres) Rotor drive gears, brand Rotor drive gears, pcs Nominal rotor torque, kNm |
220D Cummins QSX15 (220D) Fulfills U.S. EPA Tier 4 final, CARB Tier 4 final and EU Stage IV 439 (220D) 15 6 TIER 3 (stage IIIA) (220D) 700 Lohmann + Stolterfoht 2 220 |
440D Cummins QSX15 (440D) Fulfills U.S. EPA Tier 4 final, CARB Tier 4 final and EU Stage IV 439 (440D) 15 6 TIER 3 (stage IIIA) (440D) 700 Lohmann + Stolterfoht 2 440 |
Shredding tools
|
Rotor shredding length, mm Rotor speed, rpm Rotor diameter, mm Rotor knives, pcs Counter knives, pcs Rotor knife type Rotor knife size Optional equipment Overband magnet Rotor screen width x length (optional) Rotor screen sizes (optional) (mm) |
220D 3000 27 870 22 23 Bolt-on, reversible cutting knife 115x70
Overband magnet 3050x850 103,157, 205, 258 |
440D 3000 28 920 33 23 Bolt-on, reversible cutting knife 115x70
Overband magnet 3050x900 109, 167, 220, 275 |
Adjusting end product size with counter knives
For volume reduction and pre-shredding purposes up to two-thirds of the counter-knives can be replaced with half knives which result in bigger end product size and higher capacity. Using rotor screens allows finetuning the homogeneity of the small particle size.
Easy to operate and maintain
One of the smart features for daily operation is the opening sidewall. It provides an easy and safe access to clean and remove non-shreddable objects from the rotor shaft.
The opening sidewall also functions as a service hatch when changing or replacing rotor knives and counter knives. Both rotor knives and counter knives have two wearing surfaces which prolong their lifetime.
Maximized reliability
Renowned for designing long-lasting, robust machines, Tana engineering aims at the best customer experience through durability and high uptime. TANA Shark has a hydrostatic power transmission, identical to the one used in TANA landfill compactors.
It introduces a patented *swing frame construction. The robustness of the Shark is shown in its weight. The material of the wearing parts, such as the rotor knives, is an alloy developed specifically for the TANA Shark.
*The swing frame construction (pat.) by TANA protects the gearbox, thus increasing reliability and maximizing uptime of the machine.
Produce anything from 50 to 500mm particle size
Screens for fine tuning the end product
The end product size and quality can be determined and finalized by using a rotor screen with suitable mesh size out of the five available. The suitable size is defined by the characteristics of the material and the wanted end product size.
Adjustable rotor to screen clearance
The rotor to screen clearance can be narrowed down to one millimeter. The optimal clearance depends on the material and the mesh size of the screen.
Ergonomic access to the service points
Daily routines can be performed easily with a walk-around area around the power pack. FOPS gives shelter from rain and extensive sunlight. Easy access to service points is not only ergonomic but it also diminishes the time needed for routine service operations.
The pre-screening of the airflow to the radiators and an oversized engine air filter greatly reduce the daily service attention required.
Click here to view the full Tana Shark brochure
Call GCM Enviro on 02 9457 9399 to discuss your requirements or to arrange a demo
Other products
